Bill of Materials - Digi-Key Order Form

MegaSquirt V3 Stimulator (MegaStim) by Jeff Clarke

Digi-Key have recently changed the security and operation of their ordering system (April 2009), and these automated ordering pages no longer work to auto-fill the components, reference numbers and quantities. We are in contact with Digi-Key to sort this out, however there is no guarantee this will be resolved successfully. If it is not, we will have to look at alternate suppliers who do provide such a service. In the meantime, you will have to enter the components manually, unfortunately. We are very sorry for the inconvenience.

This is the MegaSquirt V3 Stimulator ordering form for Digi-Key. It will allow you to assemble the MegaSquirt® V3 Stimulator with just a printed circuit board (PCB).

Change any quantities to the numbers you want, and click the button to send your order to Digi-Key. If the default quantities are used, the price for a 'V3 MegaStim parts kit' should be $109.21, as of March 2006.

Quantities are as required for V3 MegaStim, except where minimum order quantities are required. In these cases, the minimum is ordered, with the required quantity in (brackets).

To order complete the following steps:

  1. Verify that you have the quantities you want for each item below.

  2. Then send your order to Digi-Key:

    (Go to Ordering Homepage and "CREATE NEW ORDER" if you want to start over with an order after you have submitted it.)

  3. You will be redirected to Digi-Key to verify your order, payment method, and shipping details.
Qty.
MegaSquirt
Reference
Description
Digi-Key P/N
Unit
Price
Ext.
Price
per kit
(1) Polarized Capacitor (Radial) 180µF 0.34 0.34
(2) Capacitor 0.01µF 0.072 0.72
(1) Capacitor 0.47µF 0.633 6.33
(1) Capacitor 0.0068µF 0.072 0.72
(1) Capacitor 0.1µF 0.129 1.29
(1) Capacitor 0.2µF 0.396 3.96
(2) Red/Green Bicolor 2 pin LED 0.37 0.74
(9) RED GaAs LED 0.224 2.24
(1) Diode 1N4001 0.26 0.26
(1) Fuse, 1A 0.36 1.80
(3) Header 8.26 24.78
(1) Header, 6-Pin, 0.1" spacing 0.53 0.53
(1) NPN Bipolar Transistor 0.20 0.20
(1) PNP General Purpose Amplifier 0.18 0.18
(7) Resistor 10K 0.054 0.54
(9) Resistor 330R 0.054 0.54
(6) Potentiometer 10K 0.99 5.94
(1) Resistor 200 0.054 0.27
(3) Resistor 39K 0.054 0.27
(1) Resistor 100R 0.054 0.27
(1) Resistor 1K 0.054 0.27
(1) Single-Pole, Double-Throw Switch 6.67 6.67
(8) SPDT Subminiature Toggle Switch, Right Angle Mounting, Vertical Actuation 0.71 5.68
(1) PIC Microcontroller 4.13 4.13
(2) Voltage to Frequency Converter 8.30 16.60
(1) Voltage Regulator 1.82 1.82
(2) Fuse Clip 0.29 0.58
(1) PIC Socket DIP20 (optional) 0.78 0.78
Sub-
total		 Shipping and processing may be extra, depending on your location and order size $109.21
Here are the other parts you'll need to build your V3 MegaStim: Some MegaSquirt® Related Links:

MegaSquirt Site

MegaSquirt Forums

MegaSquirt FAQ

NOTES:

Click here to go back to the MegaSquirt® FAQ
MegaSquirt® and MicroSquirt® controllers are experimental devices intended for educational purposes.
MegaSquirt® and MicroSquirt® controllers are not for sale or use on pollution controlled vehicles. Check the laws that apply in your locality to determine if using a MegaSquirt® or MicroSquirt® controller is legal for your application.
© 2006 Bruce Bowling and Al Grippo. All rights reserved. MegaSquirt® and MicroSquirt® are registered trademarks. This document is solely for the support of MegaSquirt® boards from Bowling and Grippo.